How to Submit VSC and GAP Contracts in One Step

Sarah Neeley
|
October 29, 2026
Close-up of a car key being handed over

To submit a vehicle service contract and GAP in one step, rate both products from the same deal data, present them on one menu, record the customer’s selections, build both contracts from the rated data and send them to their providers together. Confirm eligibility and deal structure first, so neither contract gets sent back.

Most finance managers know the routine. The customer says yes to a service contract and GAP, and the real work starts. There are two portals, two sets of forms, the same VIN and mileage typed twice, and two chances for a typo that sends a contract back a week later.

Submitting both in one step means building the product contracts from shared deal data and sending them together. Here’s how the process works and what to check along the way.

What does “one step” actually mean?

One step doesn’t mean skipping steps. It means the work you used to repeat for each product happens once.

  • Deal data is entered once and used to rate, present and contract every product.
  • Both products are presented on the same menu, so the customer’s selections are recorded together.
  • Both contracts are submitted together to their providers from one place.

The service contract and the GAP may still go to different providers or administrators. What changes is that the dealership isn’t rebuilding the deal for each one.

Before you start, what has to be in place?

  • Connected providers. Each provider must accept electronic rating and contracting through your menu platform. Products from providers that aren’t connected still need their own process.
  • Clean deal data. VIN, odometer, sale date, sale price, amount financed, term and lienholder have to be right before rating.
  • Current product setup. Retail pricing rules, terms and deductibles need to be configured in the menu.

How to submit VSC and GAP contracts in one step

Step 1. Confirm the deal structure

GAP depends on the financing: amount financed, term, lender and loan-to-value. Finalize the structure, or at least the key numbers, before you rate. Re-rating after the structure changes is one of the most common fixes for mismatched contracts.

Step 2. Rate both products from the same deal

Use eRating to pull rates and eligibility for the service contract and GAP at the same time. Check the results. For the service contract, look at mileage and age limits. For GAP, look at loan-to-value and term limits.

Step 3. Present both on one menu

Show the service contract and GAP options side by side with your other products. Use the same language on every menu. Record what the customer chooses and what they decline.

Step 4. Build both contracts from the rated data

The contract details, including coverage, term, deductible, price, vehicle and buyer, should fill in from the rated selections instead of being re-typed. Review them once on screen.

Step 5. Check the paperwork

Confirm that every form and required field each provider needs is complete before you submit.

Step 6. Submit both contracts together

Send both contracts to their providers in one submission, then confirm that each provider received its contract. A submission isn’t finished until each provider has accepted it.

Step 7. Match the finance contract

Make sure the product prices on the retail installment contract match the product contracts exactly before the deal goes to the lender.

Pre-submit checklist

  • ☐ VIN and odometer match the vehicle and the title paperwork
  • ☐ Sale date and in-service date are correct
  • ☐ Service contract term and mileage are within eligibility
  • ☐ GAP is within the provider’s loan-to-value and term limits, and the calculation is saved
  • ☐ Lienholder name and address are correct on the GAP contract
  • ☐ Product prices are identical on the menu, the product contracts and the finance contract
  • ☐ Every required form and field is complete for each provider
  • ☐ Declined products are recorded

Separate submissions vs one step

TaskSeparate, product by productOne step
Entering deal dataOnce per provider portalOnce, reused for every product
RatingA separate lookup per productBoth rated together from the deal
SubmissionOne portal at a timeBoth contracts sent together
Follow-upCheck each portal separatelyConfirm that each provider received its contract

The bigger gain usually isn’t the minutes saved at the desk. It’s that the office team stops finding errors days later, when they cost the most to fix.

Why contracts still get sent back, and how to prevent it

Even with electronic contracting, product contracts come back for a few repeat reasons.

  • The deal changed after rating. A new term, amount financed or lender after the products were rated. Re-rate whenever the structure changes.
  • Mismatched prices. The product price on the finance contract doesn’t match the product contract.
  • Missed eligibility. The vehicle was over a mileage limit, or the GAP deal was outside loan-to-value limits.
  • Incomplete paperwork on one of the two contracts.
  • Payment problems. The contract was submitted, but the provider’s payment is late or missing.

Track your sent-back contracts by reason for a month. You’ll likely find that a few causes repeat.

How this works in AmpliFI

AmpliFI rates your entire protection lineup and submits every contract from one place. When the customer says yes, the finance manager submits the entire deal in a single click, covering every contract and every provider at once. There’s no processing each product through its own system.

Which products you can rate and submit this way depends on the providers connected to your setup, and a demo shows how your own products would work.

Frequently Asked Questions

Can you eContract a service contract and GAP at the same time?

Yes, if both providers are connected to your menu platform for electronic contracting. Both products are rated from the same deal data, presented on one menu and submitted together, even when they go to different providers.

Why do GAP contracts get sent back?

Common reasons include the deal structure changing after GAP was rated, loan-to-value or term outside the provider’s limits, wrong lienholder information, mismatched prices between the GAP contract and the finance contract, and incomplete paperwork. Re-rating after any structure change prevents many of them.

Do I still need to send product contracts to providers if the lender funded the deal?

Yes. Funding the retail installment contract with the lender is separate from submitting product contracts to providers. A product contract has to be submitted and accepted for the customer’s coverage to be in place as expected.

What does one-step submission change at the desk?

Deal data is entered once, both products are rated from it, and both contracts go to their providers together. The service contract and GAP may still go to different providers.

Dealers: See a service contract and GAP rated, presented and submitted together. Request a demo. Agents and TPAs: Become a Preferred Partner.

Dealership F&I office desk with a deal menu on the monitor

Powered by Carketa

Stop retyping every deal.

AmpliFI pulls VIN, mileage, price, and buyer details into your menu automatically.

Stop retyping every deal.